Skip to content

Micro Fire and EMS Frequencies

Micro in Johnston County, North Carolina has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Smithfield (Johnston County), about 6 miles away.

About Micro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Micro: Johnston County Fire 154.3400 MHz, FM, CSQ. Trunked: Johnston County, for example Johnston County Fire talkgroup 1047 (hex 417).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Johnston County: 1 talkgroup; Johnston County: 24 talkgroups; North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Micro, start with the Smithfield site of Johnston County, about 6 miles away. Its control channels: 851.225, 851.725, 852.2 MHz.

Data updated .

Micro trunked talkgroups

Johnston County

Johnston County talkgroups
AgencyDescriptionTalkgroupHexMode
Johnston County FireMicro Fire Department Private1047417T

Johnston County channels that also cover Micro

Fire Dispatch

Fire Dispatch frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County FireJohnston County Fire/EMS Dispatch154.3400CSQFMWPNR820

Fire Talk-around

Fire Talk-around frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County FireJohnston County State Fire154.2800110.9 PLFMWPNR820

EMS Tactical

EMS Tactical frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County EMSJohnston County State Ems155.2800110.9 PLFMWZX463

Johnston County

Johnston County talkgroups
AgencyDescriptionTalkgroupHexMode
Johnston County FireFire Call10023eaT
Johnston County FireFire Paging1031407T
Bentonville FireBentonville Fire – Fire Ground103840eT
County Emergency ManagementEmergency Services10013e9T
Johnston County FireFire Common10033ebT
Johnston County FireFire Forestry Tactical10053edT
Johnston County FireFire Patch3020bccT
Johnston County FireStatewide Fire3036bdcT
Johnston County FireFire Marshal10043ecT
Johnston County FireAntioch Fire Department Private103440aT
Johnston County FireBethany Fire Department Private103740dT
Johnston County FireBlackman's Crossroads Fire Department Private103940fT
Johnston County FireCorinth Holder Fire Department Private1040410T
Johnston County FireMeadow Fire Department Private1048418T
Johnston County FireThanksgiving Fire Department Private105441eT
Johnston County FireWest Johnston Fire Department Private105541fT
Johnston County FireJohnston Community College Fire Training3050beaT
Johnston County EMSEMS Paging10266T
Johnston County EMSEMS Comm20027d2T
Johnston County EMSJohnston County EMS – Tactical Channel20047d4T
Johnston County EMSEMS Patch3019bcbT
Johnston County EMSEMS Call20037d3T
County HospitalsJohnston Health Clayton20057d5T
County HospitalsJohnston Health Smithfield20067d6T

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Johnston County FireJohnston County Fire – Dispatch260026592D
Johnston County EMSJohnston County EMS – Tactical Channel260016591D

Nearest trunked radio sites

Distances are measured from the center of Micro.

Smithfield · Johnston County
RFSS 4 · Site 4 (hex 4) · NAC 004 · about 6 mi away
Control 851.225, 851.725, 852.2, 852.7, 853.225, 855.7125
Archers Lodge · Johnston County
RFSS 5 · Site 5 (hex 5) · NAC 5 · about 11 mi away
Control 851.4375, 852.325, 852.9375, 853.725
Archers Lodge · North Carolina VIPER
RFSS 1 · Site 2 (hex 2) · NAC 1F0 · about 11 mi away
Control 855.0375, 855.7625
Voice 851.4, 852.425, 853.475, 853.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Micro?

We do not have a fire dispatch channel listed specifically for Micro. The county-level fire dispatch channels in the same county: Johnston County Fire 154.3400 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Micro?

Yes. Fire and EMS talkgroups are listed for Johnston County: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Micro?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Micro?

For Micro, start with the Smithfield site of Johnston County. Its control channels are 851.225, 851.725, 852.2, 852.7 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Micro fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Micro are marked encrypted.