About Lander County Fire and EMS Frequencies
Quick answer: EMS dispatch for Lander County: Sheriff and Fire 155.7150 MHz, P25, NAC 270.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Lander County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheriff and Fire | Sheriff and Fire – Tactical Channel (multi-site) | 155.8650 In 158.9475 | 141.3 PL | FM | KOM798 |
| Sheriff and Fire | Kingston Volunteer Fire Tactical | 158.7600 | CSQ | FM | WPGS841 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheriff and Fire | Sheriff and Fire – Dispatch (multi-site) | 155.7150 In 158.8050 | NAC 270 | P25 | WROZ490 |
Radio system sites in Lander County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Lander County
Common questions
What frequency does EMS or the ambulance service use in Lander County?
EMS dispatch channels listed for Lander County: Sheriff and Fire 155.7150 MHz, P25, NAC 270.
What scanner do I need to listen to fire and EMS in Lander County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Lander County?
For Lander County, start with the Argenta Rim (E of Battle Mtn) site of Nevada Shared Radio System (EDACS). Its control channels are 854.9625, 856.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lander County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Lander County are marked encrypted.