About Austin Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Austin: Sheriff and Fire 155.7150 MHz, P25, NAC 270.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Lander County channels that also cover Austin
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheriff and Fire | Sheriff and Fire – Tactical Channel (multi-site) | 155.8650 In 158.9475 | 141.3 PL | FM | KOM798 |
| Sheriff and Fire | Kingston Volunteer Fire Tactical | 158.7600 | CSQ | FM | WPGS841 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheriff and Fire | Sheriff and Fire – Dispatch (multi-site) | 155.7150 In 158.8050 | NAC 270 | P25 | WROZ490 |
Nearest trunked radio sites
Distances are measured from the center of Austin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Austin?
We do not have a EMS dispatch channel listed specifically for Austin. The county-level EMS dispatch channels in the same county: Sheriff and Fire 155.7150 MHz, P25, NAC 270.
What scanner do I need to listen to fire and EMS in Austin?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Austin?
For Austin, start with the Austin Peak (SE of Austin) site of Nevada Shared Radio System (P25). Its control channels are 854.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.