About Winside Fire and EMS Frequencies
Quick answer: Fire dispatch for Winside: Winside Fire 453.6250 MHz, narrow FM, no tone. County-level ems dispatch that covers Winside: Wayne County EMS 156.1125 MHz, narrow FM, 423 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Winside conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Winside Fire | Winside Fire – Dispatch | 453.6250 In 458.6250 | FMN | KNJD402 |
Wayne County channels that also cover Winside
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County Fire | Wayne County Fire – Dispatch | 155.9625 In 158.9175 | 413 DPL | FMN | WQFY760 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County EMS | Wayne County EMS – Dispatch | 156.1125 In 153.8375 | 423 DPL | FMN | WQFY760 |
Nearest trunked radio sites
Distances are measured from the center of Winside.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Winside?
Fire dispatch channels listed for Winside: Winside Fire 453.6250 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Winside?
We do not have a EMS dispatch channel listed specifically for Winside. The county-level EMS dispatch channels in the same county: Wayne County EMS 156.1125 MHz, narrow FM, 423 DPL.
What scanner do I need to listen to fire and EMS in Winside?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Winside?
For Winside, start with the Norfolk site of Nebraska State Radio System. Its control channels are 155.25, 155.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Winside fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Winside are marked encrypted.