About Hadar Fire and EMS Frequencies
Quick answer: Fire dispatch for Hadar: Hadar Fire 154.8600 MHz, FM, no tone. Trunked: Nebraska State Radio System, for example Pierce County Fire talkgroup 54003 (hex d2f3).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hadar, start with the Norfolk 800 site of Nebraska State Radio System, about 5 miles away. Its control channels: 854.1625, 854.3125, 854.4625 MHz.
Data updated .
Hadar conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hadar Fire | Hadar Fire – Dispatch | 154.8600 | FM | — |
Pierce County channels that also cover Hadar
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | Pierce County Fire – Dispatch – South | 154.2050 | 134 DPL | FMN | WQGZ377 |
| Pierce County Fire | Pierce County Fire – Dispatch – North | 154.2050 | 243 DPL | FMN | WQGZ377 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pierce County Fire | County Fireground | 153.8675 | FMN | — | |
| Pierce County Fire | County Fireground | 153.9575 | FMN | — | |
| Pierce County Fire | County Fireground | 154.3025 | FMN | — | |
| Pierce County Fire | County Fireground | 155.1225 | FMN | — |
Nebraska State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pierce County Fire | Fire and Rescue | 54003 | d2f3 | D |
Nearest trunked radio sites
Distances are measured from the center of Hadar.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hadar?
Fire dispatch channels listed for Hadar: Hadar Fire 154.8600 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Hadar?
Yes. The county-level systems that cover Hadar are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hadar?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hadar?
For Hadar, start with the Norfolk 800 site of Nebraska State Radio System. Its control channels are 854.1625, 854.3125, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hadar fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Hadar are marked encrypted.