About Seward County Fire and EMS Frequencies
Quick answer: Fire dispatch for Seward County: Seward County Fire 453.3750 MHz, narrow FM, no tone.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Seward County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seward County Fire | Fire/EMS Dispatch | 453.3750 In 458.3750 | FMN | KNNU236 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seward County Fire | Seward County Fire – Erickson | 460.3750 In 465.3750 | 503 DPL | FMN | WPUJ969 |
| Seward County Fire | Seward County Fire – Garland | 460.4000 In 465.4000 | 365 DPL | FMN | WPUJ969 |
| Seward County Fire | Seward County Fire – Milford | 460.5750 In 465.5750 | 172 DPL | FMN | WPUJ969 |
| Seward County Fire | Seward County Fire – Beaver Crossing | 460.6000 In 465.6000 | 047 DPL | FMN | WPUJ969 |
Radio system sites in Seward County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Seward County
Common questions
What frequency does the fire department use in Seward County?
Fire dispatch channels listed for Seward County: Seward County Fire 453.3750 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Seward County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Seward County?
For Seward County, start with the Milford site of Nebraska State Radio System. Its control channels are 155.565, 156.21 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Seward County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Seward County are marked encrypted.