Skip to content

Beaver Crossing Fire and EMS Frequencies

We do not have frequencies listed specifically for Beaver Crossing in Seward County, Nebraska yet. Countywide channels for Seward County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Milford (Nebraska State Radio System), about 7 miles away.

About Beaver Crossing Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Beaver Crossing: Seward County Fire 453.3750 MHz, narrow FM, no tone.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Seward County channels that also cover Beaver Crossing

Fire Dispatch

Fire Dispatch frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireFire/EMS Dispatch453.3750
In 458.3750
FMNKNNU236

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireSeward County Fire – Erickson460.3750
In 465.3750
503 DPLFMNWPUJ969
Seward County FireSeward County Fire – Garland460.4000
In 465.4000
365 DPLFMNWPUJ969
Seward County FireSeward County Fire – Milford460.5750
In 465.5750
172 DPLFMNWPUJ969
Seward County FireSeward County Fire – Beaver Crossing460.6000
In 465.6000
047 DPLFMNWPUJ969

Nearest trunked radio sites

Distances are measured from the center of Beaver Crossing.

Milford · Nebraska State Radio System
RFSS 1 · Site 69 (hex 45) · NAC B83 · about 7 mi away
Control 155.565, 156.21
Voice 154.8975, 155.07
York 800 · Nebraska State Radio System
RFSS 1 · Site 96 (hex 60) · NAC B82 · about 16 mi away
Control 855.2125, 855.4875, 855.7125
Voice 855.9625
York · Nebraska State Radio System
RFSS 1 · Site 81 (hex 51) · NAC B81 · about 16 mi away
Control 154.7775, 155.5125, 156.1425
Voice 154.4225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Beaver Crossing?

We do not have a fire dispatch channel listed specifically for Beaver Crossing. The county-level fire dispatch channels in the same county: Seward County Fire 453.3750 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Beaver Crossing?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Beaver Crossing?

For Beaver Crossing, start with the Milford site of Nebraska State Radio System. Its control channels are 155.565, 156.21 MHz. Program a control channel first; the scanner finds the voice channels from it.