Skip to content

Red Willow County Fire and EMS Frequencies

Red Willow County in Nebraska has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Red Willow County Fire and EMS Frequencies

Quick answer: Fire dispatch for Red Willow County: Red Willow County Fire 453.2500 MHz, narrow FM, 103.5 PL. Trunked: Nebraska State Radio System, for example Red Willow County Fire talkgroup 54803 (hex d613).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Red Willow County, start with the McCook site of Nebraska State Radio System. Its control channels: 154.68, 155.01 MHz.

Data updated .

Red Willow County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Red Willow County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Red Willow County FireRed Willow County Fire – Dispatch453.2500
In 458.2500
103.5 PLFMNWPZQ674

Red Willow County trunked talkgroups

Nebraska State Radio System

Nebraska State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Red Willow County FireCounty Fire54803d613D

Radio system sites in Red Willow County

Program the control channel first; your scanner finds the voice channels from it.

McCook · Nebraska State Radio System
RFSS 1 · Site 50 (hex 32) · NAC B89
Control 154.68, 155.01
Voice 154.085, 154.34
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Red Willow County

Common questions

What frequency does the fire department use in Red Willow County?

Fire dispatch channels listed for Red Willow County: Red Willow County Fire 453.2500 MHz, narrow FM, 103.5 PL.

Do fire departments and EMS use a trunked radio system in Red Willow County?

Yes. Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Red Willow County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Red Willow County?

For Red Willow County, start with the McCook site of Nebraska State Radio System. Its control channels are 154.68, 155.01 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Red Willow County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Red Willow County are marked encrypted.

Are Red Willow County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Red Willow County are marked encrypted.