About McCook Fire and EMS Frequencies
Quick answer: Fire dispatch for McCook: McCook Fire 460.1250 MHz, narrow FM, 125 DPL. Trunked: Nebraska State Radio System, for example Red Willow County Fire talkgroup 54803 (hex d613).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For McCook, start with the McCook site of Nebraska State Radio System, about 2 miles away. Its control channels: 154.68, 155.01 MHz.
Data updated .
McCook conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McCook Fire | McCook Fire – Dispatch | 460.1250 In 465.1250 | 125 DPL | FMN | WNQM853 |
Red Willow County channels that also cover McCook
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Red Willow County Fire | Red Willow County Fire – Dispatch | 453.2500 In 458.2500 | 103.5 PL | FMN | WPZQ674 |
Nebraska State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Red Willow County Fire | County Fire | 54803 | d613 | D |
Nearest trunked radio sites
Distances are measured from the center of McCook.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in McCook?
Fire dispatch channels listed for McCook: McCook Fire 460.1250 MHz, narrow FM, 125 DPL.
Do fire departments and EMS use a trunked radio system in McCook?
Yes. The county-level systems that cover McCook are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in McCook?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in McCook?
For McCook, start with the McCook site of Nebraska State Radio System. Its control channels are 154.68, 155.01 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are McCook fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for McCook are marked encrypted.