About Platte County Fire and EMS Frequencies
Quick answer: Fire dispatch for Platte County: Lindsey Fire 154.8750 MHz, narrow FM, 043 DPL; Platte County Fire 154.1300 MHz, narrow FM, 464 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Platte County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lindsey Fire | Lindsey Fire – Dispatch | 154.8750 | 043 DPL | FMN | WQES263 |
| Platte County Fire | South/Platte Center Rescue | 154.1300 In 159.0300 | 464 DPL | FMN | WQES818 |
| Platte County Fire | Fire / EMS South | 154.3850 In 158.9400 | 132 DPL | FMN | WQDV242 |
| Platte County Fire | Fire / EMS North | 155.0400 In 150.9950 | 054 DPL | FMN | WQES263 |
Radio system sites in Platte County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Platte County
Common questions
What frequency does the fire department use in Platte County?
Fire dispatch channels listed for Platte County: Lindsey Fire 154.8750 MHz, narrow FM, 043 DPL; Platte County Fire 154.1300 MHz, narrow FM, 464 DPL.
What scanner do I need to listen to fire and EMS in Platte County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Platte County?
For Platte County, start with the Humphrey site of Nebraska State Radio System. Its control channels are 155.91, 156.15 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Platte County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Platte County are marked encrypted.