Skip to content

Columbus Fire and EMS Frequencies

Columbus in Platte County, Nebraska has 2 conventional frequencies and 7 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Columbus (Nebraska State Radio System), about 2 miles away.

About Columbus Fire and EMS Frequencies

Quick answer: Fire dispatch for Columbus: Columbus Fire 159.3900 MHz, narrow FM, 155 DPL. Trunked: Nebraska State Radio System, for example Columbus Fire talkgroup 51007 (hex c73f).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Columbus, start with the Columbus site of Nebraska State Radio System, about 2 miles away. Its control channels: 854.9625 MHz.

Data updated .

Columbus conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Columbus
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbus FireNorth159.3900
In 153.9800
155 DPLFMNWPOZ213

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Columbus
AgencyDescriptionFrequency (MHz)ToneModeFCC
Columbus FireFire Operations159.3150
In 153.8000
156 DPLFMNWPOZ213

Columbus trunked talkgroups

Nebraska State Radio System

Nebraska State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Columbus FireColumbus Fire Dispatch51007c73fD
Columbus FireColumbus Fire51008c740D
Columbus FireColumbus Fire51009c741D
Columbus FireColumbus Fire51010c742D
Columbus FireColumbus Fire51011c743D
Columbus FireColumbus Fire51012c744D
Columbus FireColumbus Fire51013c745D

Platte County channels that also cover Columbus

Fire Dispatch

Fire Dispatch frequencies for Platte County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lindsey FireLindsey Fire – Dispatch154.8750043 DPLFMNWQES263
Platte County FireSouth/Platte Center Rescue154.1300
In 159.0300
464 DPLFMNWQES818
Platte County FireFire / EMS South154.3850
In 158.9400
132 DPLFMNWQDV242
Platte County FireFire / EMS North155.0400
In 150.9950
054 DPLFMNWQES263

Nearest trunked radio sites

Distances are measured from the center of Columbus.

Columbus · Nebraska State Radio System
RFSS 1 · Site 99 (hex 63) · NAC B8D · about 2 mi away
Control 854.9625
Voice 854.025, 854.3375, 854.6
Humphrey · Nebraska State Radio System
RFSS 1 · Site 74 (hex 4A) · about 16 mi away
Control 155.91, 156.15
Voice 155.1375, 155.535
Osceola · Nebraska State Radio System
RFSS 1 · Site 73 (hex 49) · NAC B8C · about 18 mi away
Control 155.625, 155.97
Voice 154.6575, 155.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Columbus?

Fire dispatch channels listed for Columbus: Columbus Fire 159.3900 MHz, narrow FM, 155 DPL.

Do fire departments and EMS use a trunked radio system in Columbus?

Yes. Fire and EMS talkgroups are listed for Nebraska State Radio System: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Columbus?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Columbus?

For Columbus, start with the Columbus site of Nebraska State Radio System. Its control channels are 854.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Columbus fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Columbus are marked encrypted.

Are Columbus fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Columbus are marked encrypted.