Skip to content

Funk Fire and EMS Frequencies

We do not have frequencies listed specifically for Funk in Phelps County, Nebraska yet. Countywide channels for Phelps County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Holdrege (Nebraska State Radio System), about 12 miles away.

About Funk Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Funk: Phelps County Fire 152.0075 MHz, narrow FM, 123.0 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Phelps County channels that also cover Funk

Fire Dispatch

Fire Dispatch frequencies for Phelps County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phelps County FirePhelps County Fire – Dispatch152.0075123.0 PLFMNWPIW339

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Phelps County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phelps County FireFire/EMS Operations155.7150
In 155.0400
118.8 PLFMNKVC484

Nearest trunked radio sites

Distances are measured from the center of Funk.

Holdrege · Nebraska State Radio System
RFSS 1 · Site 42 (hex 2A) · NAC B82 · about 12 mi away
Control 155.505, 156.1275
Voice 154.22, 154.935
Kearney-Buffalo County Simulcast · Nebraska State Radio System
RFSS 1 · Site 24 (hex 18) · NAC B84 · about 18 mi away
Control 852.7, 852.95, 853.1625, 853.4125
Voice 851.725, 851.975
Elm Creek · Nebraska State Radio System
RFSS 1 · Site 25 (hex 19) · NAC B85 · about 20 mi away
Control 859.4625, 859.7375, 859.9625
Voice 859.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Funk?

We do not have a fire dispatch channel listed specifically for Funk. The county-level fire dispatch channels in the same county: Phelps County Fire 152.0075 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Funk?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Funk?

For Funk, start with the Holdrege site of Nebraska State Radio System. Its control channels are 155.505, 156.1275 MHz. Program a control channel first; the scanner finds the voice channels from it.