Skip to content

Pawnee County Fire and EMS Frequencies

Pawnee County in Nebraska has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Pawnee County Fire and EMS Frequencies

Quick answer: Fire dispatch for Pawnee County: Pawnee, County of 154.3925 MHz, FM, 186.2 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Pawnee County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Pawnee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pawnee, County ofFire/EMS Dispatch154.3925186.2 PLFMWQAL998

Radio system sites in Pawnee County

Program the control channel first; your scanner finds the voice channels from it.

Pawnee City · Nebraska State Radio System
RFSS 1 · Site 86 (hex 56) · NAC 148
Control 155.5725, 155.8875
Voice 154.1675, 155.3775
Steinauer · Omaha Regional Interoperability Network (ORION)
RFSS 1 · Site 11 (hex B) · NAC 14B
Control 857.9375, 858.4875
Voice 855.9625, 856.4375, 856.4875, 856.7625, 856.9375, 857.4375, 857.4875, 858.4375, 858.9375, 859.4375, 859.4875, 859.9375, 860.4375, 860.4875, 860.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pawnee County

Common questions

What frequency does the fire department use in Pawnee County?

Fire dispatch channels listed for Pawnee County: Pawnee, County of 154.3925 MHz, FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Pawnee County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pawnee County?

For Pawnee County, start with the Pawnee City site of Nebraska State Radio System. Its control channels are 155.5725, 155.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pawnee County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Pawnee County are marked encrypted.