Skip to content

Kimball County Fire and EMS Frequencies

Kimball County in Nebraska has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Kimball County Fire and EMS Frequencies

Quick answer: Fire dispatch for Kimball County: Kimball County Fire 154.2575 MHz, narrow FM, 167.9 PL. EMS dispatch for Kimball County: Kimball County EMS 154.1150 MHz, narrow FM, 118.8 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Kimball County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Kimball County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kimball County FireKimball County Fire – Dispatch154.2575
In 158.9775
167.9 PLFMNWQCZ888
Kimball County FireKimball County Fire – Bushnell156.1950186.2 PLFMNWQCZ888

EMS Dispatch

EMS Dispatch frequencies for Kimball County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kimball County EMSEMS Paging154.1150
In 158.8200
118.8 PLFMNKBO334
Kimball County EMSKimball County EMS – Dispatch154.6575
In 159.1875
156.7 PLFMNWQCZ888
Kimball County EMSHealthcare Services453.4250
In 458.4250
203.5 PLFMNWQGV601

Radio system sites in Kimball County

Program the control channel first; your scanner finds the voice channels from it.

Kimball · Nebraska State Radio System
RFSS 1 · Site 80 (hex 50) · NAC B83
Control 155.46, 155.73, 156.09
Voice 155.145
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kimball County

Common questions

What frequency does the fire department use in Kimball County?

Fire dispatch channels listed for Kimball County: Kimball County Fire 154.2575 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Kimball County?

EMS dispatch channels listed for Kimball County: Kimball County EMS 154.1150 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Kimball County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Kimball County?

For Kimball County, start with the Kimball site of Nebraska State Radio System. Its control channels are 155.46, 155.73, 156.09 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kimball County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Kimball County are marked encrypted.