Skip to content

Dix Fire and EMS Frequencies

We do not have frequencies listed specifically for Dix in Kimball County, Nebraska yet. Countywide channels for Kimball County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kimball (Nebraska State Radio System), about 10 miles away.

About Dix Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dix: Kimball County Fire 154.2575 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Dix: Kimball County EMS 154.1150 MHz, narrow FM, 118.8 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Kimball County channels that also cover Dix

Fire Dispatch

Fire Dispatch frequencies for Kimball County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kimball County FireKimball County Fire – Dispatch154.2575
In 158.9775
167.9 PLFMNWQCZ888
Kimball County FireKimball County Fire – Bushnell156.1950186.2 PLFMNWQCZ888

EMS Dispatch

EMS Dispatch frequencies for Kimball County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kimball County EMSEMS Paging154.1150
In 158.8200
118.8 PLFMNKBO334
Kimball County EMSKimball County EMS – Dispatch154.6575
In 159.1875
156.7 PLFMNWQCZ888
Kimball County EMSHealthcare Services453.4250
In 458.4250
203.5 PLFMNWQGV601

Nearest trunked radio sites

Distances are measured from the center of Dix.

Kimball · Nebraska State Radio System
RFSS 1 · Site 80 (hex 50) · NAC B83 · about 10 mi away
Control 155.46, 155.73, 156.09
Voice 155.145
Sidney · Nebraska State Radio System
RFSS 1 · Site 34 (hex 22) · NAC B86 · about 26 mi away
Control 155.115, 155.61
Voice 154.4, 154.71
Gering · Nebraska State Radio System
RFSS 1 · Site 21 (hex 15) · NAC B80 · about 42 mi away
Control 857.4875, 857.7625, 858.0375
Voice 857.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dix?

We do not have a fire dispatch channel listed specifically for Dix. The county-level fire dispatch channels in the same county: Kimball County Fire 154.2575 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Dix?

We do not have a EMS dispatch channel listed specifically for Dix. The county-level EMS dispatch channels in the same county: Kimball County EMS 154.1150 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Dix?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dix?

For Dix, start with the Kimball site of Nebraska State Radio System. Its control channels are 155.46, 155.73, 156.09 MHz. Program a control channel first; the scanner finds the voice channels from it.