Skip to content

Belmar Fire and EMS Frequencies

We do not have frequencies listed specifically for Belmar in Keith County, Nebraska yet. Countywide channels for Keith County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Arthur (Nebraska State Radio System), about 14 miles away.

About Belmar Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belmar: Keith County Fire 156.1650 MHz, narrow FM, CSQ. County-level ems dispatch that covers Belmar: Keith County EMS 462.9500 MHz, narrow FM, CSQ.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Keith County channels that also cover Belmar

Fire Dispatch

Fire Dispatch frequencies for Keith County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Keith County FireFire Paging156.1650CSQFMNKAG374

EMS Dispatch

EMS Dispatch frequencies for Keith County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Keith County EMSEMS/Hospital462.9500
In 467.9500
CSQFMNWNYH732

Nearest trunked radio sites

Distances are measured from the center of Belmar.

Arthur · Nebraska State Radio System
RFSS 1 · Site 41 (hex 29) · NAC B8B · about 14 mi away
Control 155.58, 155.82, 156.24
Voice 154.875
Ogallala · Nebraska State Radio System
RFSS 1 · Site 36 (hex 24) · NAC B8A · about 14 mi away
Control 155.6625, 155.9625
Voice 155.19, 155.4075
Big Springs · Nebraska State Radio System
RFSS 1 · Site 88 (hex 58) · NAC B8F · about 18 mi away
Control 155.4375, 155.7375
Voice 155.0025, 155.2575
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belmar?

We do not have a fire dispatch channel listed specifically for Belmar. The county-level fire dispatch channels in the same county: Keith County Fire 156.1650 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Belmar?

We do not have a EMS dispatch channel listed specifically for Belmar. The county-level EMS dispatch channels in the same county: Keith County EMS 462.9500 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Belmar?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Belmar?

For Belmar, start with the Arthur site of Nebraska State Radio System. Its control channels are 155.58, 155.82, 156.24 MHz. Program a control channel first; the scanner finds the voice channels from it.