About Chappell Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Chappell: Deuel County Fire 154.2425 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Chappell: Deuel County EMS 453.1500 MHz, narrow FM, 271 DPL. Trunked: Nebraska State Radio System, for example Deuel County Fire talkgroup 57803 (hex e1cb).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chappell, start with the Oshkosh site of Nebraska State Radio System, about 18 miles away. Its control channels: 155.6325, 155.8875 MHz.
Data updated .
Deuel County channels that also cover Chappell
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Deuel County Fire | Deuel County Fire – Dispatch | 154.2425 In 159.3075 | 136.5 PL | FMN | WPDU486 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Deuel County EMS | Deuel County EMS – Dispatch | 453.1500 In 458.1500 | 271 DPL | FMN | WPDU486 |
| Deuel County EMS | Deuel County EMS – Dispatch | 453.9750 In 458.9750 | 79.7 PL | FMN | WPDU486 |
Nebraska State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Deuel County Fire | County Fire | 57803 | e1cb | D |
Nearest trunked radio sites
Distances are measured from the center of Chappell.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Chappell?
We do not have a fire dispatch channel listed specifically for Chappell. The county-level fire dispatch channels in the same county: Deuel County Fire 154.2425 MHz, narrow FM, 136.5 PL.
What frequency does EMS or the ambulance service use in Chappell?
We do not have a EMS dispatch channel listed specifically for Chappell. The county-level EMS dispatch channels in the same county: Deuel County EMS 453.1500 MHz, narrow FM, 271 DPL.
Do fire departments and EMS use a trunked radio system in Chappell?
Yes. The county-level systems that cover Chappell are Fire and EMS talkgroups are listed for Nebraska State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Chappell?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chappell?
For Chappell, start with the Oshkosh site of Nebraska State Radio System. Its control channels are 155.6325, 155.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.