About Kearney Fire and EMS Frequencies
Quick answer: Fire dispatch for Kearney: Kearney Fire 460.5500 MHz, narrow FM, no tone. County-level ems dispatch that covers Kearney: Buffalo County EMS 462.9500 MHz, narrow FM, 371 DPL. Trunked: Nebraska State Radio System, for example Kearney Fire talkgroup 50914 (hex c6e2).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 3 talkgroups; Nebraska State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kearney, start with the Kearney-Buffalo County Simulcast site of Nebraska State Radio System, about 1 miles away. Its control channels: 852.7, 852.95, 853.1625 MHz.
Data updated .
Kearney conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kearney Fire | Kearney Fire – Dispatch | 460.5500 In 465.5500 | FMN | WPJP638 | |
| Kearney Fire | Kearney Fire – Dispatch | 460.6250 In 465.6250 | 412 DPL | FMN | WNVC750 |
Kearney trunked talkgroups
Nebraska State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kearney Fire | Kearney Fire & Rescue Dispatch | 50914 | c6e2 | D |
| Kearney Fire | Kearney Fire & Rescue Tactical | 50915 | c6e3 | D |
| Kearney Fire | Kearney Fire & Rescue Tactical | 50916 | c6e4 | D |
Buffalo County channels that also cover Kearney
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Buffalo County Fire | Fire Paging | 152.0075 | FMN | KZO217 | |
| Buffalo County Fire | County Roads / Fire Paging | 154.1150 In 158.9550 | 072 DPL | FMN | KCW515 |
| Buffalo County Fire | Fire Paging | 154.7550 | 411 DPL | FMN | WPUX440 |
| Buffalo County Fire | Buffalo County Fire – Dispatch | 453.0250 In 458.0250 | 423 DPL | FMN | WPKJ369 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Buffalo County EMS | Buffalo County EMS – Dispatch | 462.9500 In 467.9500 | 371 DPL | FMN | KZO217 |
| Buffalo County EMS | Air Care Dispatch | 462.9750 In 467.9750 | 413 DPL | FMN | KZO217 |
Nebraska State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Buffalo County Fire | Buffalo County Fire – Dispatch | 50919 | c6e7 | D |
| Buffalo County Fire | Fire/EMS Paging (Old Med 9) | 50950 | c706 | D |
| Buffalo County EMS | Good Sam EMS Dispatch | 50923 | c6eb | D |
| Buffalo County EMS | Good Sam EMS Dispatch | 50924 | c6ec | D |
Nearest trunked radio sites
Distances are measured from the center of Kearney.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kearney?
Fire dispatch channels listed for Kearney: Kearney Fire 460.5500 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Kearney?
We do not have a EMS dispatch channel listed specifically for Kearney. The county-level EMS dispatch channels in the same county: Buffalo County EMS 462.9500 MHz, narrow FM, 371 DPL.
Do fire departments and EMS use a trunked radio system in Kearney?
Yes. Fire and EMS talkgroups are listed for Nebraska State Radio System: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kearney?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kearney?
For Kearney, start with the Kearney-Buffalo County Simulcast site of Nebraska State Radio System. Its control channels are 852.7, 852.95, 853.1625, 853.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kearney fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Kearney are marked encrypted.
Are Kearney fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Kearney are marked encrypted.