Skip to content

Buffalo County Fire and EMS Frequencies

Buffalo County in Nebraska has 6 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Buffalo County Fire and EMS Frequencies

Quick answer: Fire dispatch for Buffalo County: Buffalo County Fire 152.0075 MHz, narrow FM, no tone. EMS dispatch for Buffalo County: Buffalo County EMS 462.9500 MHz, narrow FM, 371 DPL. Trunked: Nebraska State Radio System, for example Buffalo County Fire talkgroup 50919 (hex c6e7).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Nebraska State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Buffalo County, start with the Kearney-Buffalo County Simulcast site of Nebraska State Radio System. Its control channels: 852.7, 852.95, 853.1625 MHz.

Data updated .

Buffalo County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Buffalo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Buffalo County FireFire Paging152.0075FMNKZO217
Buffalo County FireCounty Roads / Fire Paging154.1150
In 158.9550
072 DPLFMNKCW515
Buffalo County FireFire Paging154.7550411 DPLFMNWPUX440
Buffalo County FireBuffalo County Fire – Dispatch453.0250
In 458.0250
423 DPLFMNWPKJ369

EMS Dispatch

EMS Dispatch frequencies for Buffalo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Buffalo County EMSBuffalo County EMS – Dispatch462.9500
In 467.9500
371 DPLFMNKZO217
Buffalo County EMSAir Care Dispatch462.9750
In 467.9750
413 DPLFMNKZO217

Buffalo County trunked talkgroups

Nebraska State Radio System

Nebraska State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Buffalo County FireBuffalo County Fire – Dispatch50919c6e7D
Buffalo County FireFire/EMS Paging (Old Med 9)50950c706D
Buffalo County EMSGood Sam EMS Dispatch50923c6ebD
Buffalo County EMSGood Sam EMS Dispatch50924c6ecD

Radio system sites in Buffalo County

Program the control channel first; your scanner finds the voice channels from it.

Kearney-Buffalo County Simulcast · Nebraska State Radio System
RFSS 1 · Site 24 (hex 18) · NAC B84
Control 852.7, 852.95, 853.1625, 853.4125
Voice 851.725, 851.975
Elm Creek · Nebraska State Radio System
RFSS 1 · Site 25 (hex 19) · NAC B85
Control 859.4625, 859.7375, 859.9625
Voice 859.2375
Sartoria · Nebraska State Radio System
RFSS 1 · Site 26 (hex 1A) · NAC B86
Control 858.2625, 858.4875, 858.7625
Voice 858.0125
Pleasanton 800 · Nebraska State Radio System
RFSS 1 · Site 27 (hex 1B) · NAC B87
Control 856.0125, 856.2625, 856.4875
Voice 855.7375
Ravenna · Nebraska State Radio System
RFSS 1 · Site 28 (hex 1C) · NAC B88
Control 854.9875, 855.2375, 855.4875
Voice 854.6875
Gibbon · Nebraska State Radio System
RFSS 1 · Site 29 (hex 1D) · NAC B89
Control 857.2625, 857.4875, 857.7625
Voice 856.7625, 857.0125
Pleasanton · Nebraska State Radio System
RFSS 1 · Site 56 (hex 38) · NAC B8E
Control 154.965, 155.4375
Voice 154.175, 154.37
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Buffalo County

Common questions

What frequency does the fire department use in Buffalo County?

Fire dispatch channels listed for Buffalo County: Buffalo County Fire 152.0075 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Buffalo County?

EMS dispatch channels listed for Buffalo County: Buffalo County EMS 462.9500 MHz, narrow FM, 371 DPL.

Do fire departments and EMS use a trunked radio system in Buffalo County?

Yes. Fire and EMS talkgroups are listed for Nebraska State Radio System: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Buffalo County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Buffalo County?

For Buffalo County, start with the Kearney-Buffalo County Simulcast site of Nebraska State Radio System. Its control channels are 852.7, 852.95, 853.1625, 853.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Buffalo County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Buffalo County are marked encrypted.

Are Buffalo County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Buffalo County are marked encrypted.