About Webster County Fire and EMS Frequencies
Quick answer: Fire dispatch for Webster County: Southern Webster County Fire Protection District 151.2800 MHz, DMR, CC 1 · TG 1 · SL *; Webster County Fire 154.1750 MHz, narrow FM, 110.9 PL. EMS dispatch for Webster County: Cox EMS (Cox Health Systems) 150.8300 MHz, DMR, CC 7 · TG 102 · SL 1.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Webster County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southern Webster County Fire Protection District | Southern Webster County Fire Protection District – Dispatch | 151.2800 In 158.8725 | CC 1 · TG 1 · SL * | DMR | WSGC632 |
| Webster County Fire | Webster County Fire – Dispatch (North Side) | 154.1750 In 153.7700 | 110.9 PL | FMN | KYK425 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southern Webster County Fire Protection District Expired: Expired 4/24 | Fireground <b> | 154.1300 | 110.9 PL | FMN | WNRI444 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cox EMS (Cox Health Systems) | Cox EMS (Cox Health Systems) – Dispatch – Webster County | 150.8300 In 158.2650 | CC 7 · TG 102 · SL 1 | DMR | WQXD633 |
Radio system sites in Webster County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Webster County
Common questions
What frequency does the fire department use in Webster County?
Fire dispatch channels listed for Webster County: Southern Webster County Fire Protection District 151.2800 MHz, DMR, CC 1 · TG 1 · SL *; Webster County Fire 154.1750 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Webster County?
EMS dispatch channels listed for Webster County: Cox EMS (Cox Health Systems) 150.8300 MHz, DMR, CC 7 · TG 102 · SL 1.
What scanner do I need to listen to fire and EMS in Webster County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Webster County?
For Webster County, start with the Conway 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.08125, 773.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Webster County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Webster County are marked encrypted.