About Marshfield Fire and EMS Frequencies
Quick answer: Fire dispatch for Marshfield: Marshfield Fire 155.8875 MHz, narrow FM, 110.9 PL. County-level ems dispatch that covers Marshfield: Cox EMS (Cox Health Systems) 150.8300 MHz, DMR, CC 7 · TG 102 · SL 1.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Marshfield conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshfield Fire | Marshfield Fire – Tone-Outs | 155.8875 In 153.7700 | 110.9 PL | FMN | WQXW804 |
| Marshfield Fire | Marshfield Fire – Dispatch / On-Scene | 155.8875 In 153.7700 | CC 8 · TG 1001 · SL 1 | DMR | WQXW804 |
Webster County channels that also cover Marshfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southern Webster County Fire Protection District | Southern Webster County Fire Protection District – Dispatch | 151.2800 In 158.8725 | CC 1 · TG 1 · SL * | DMR | WSGC632 |
| Webster County Fire | Webster County Fire – Dispatch (North Side) | 154.1750 In 153.7700 | 110.9 PL | FMN | KYK425 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Southern Webster County Fire Protection District Expired: Expired 4/24 | Fireground <b> | 154.1300 | 110.9 PL | FMN | WNRI444 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cox EMS (Cox Health Systems) | Cox EMS (Cox Health Systems) – Dispatch – Webster County | 150.8300 In 158.2650 | CC 7 · TG 102 · SL 1 | DMR | WQXD633 |
Nearest trunked radio sites
Distances are measured from the center of Marshfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Marshfield?
Fire dispatch channels listed for Marshfield: Marshfield Fire 155.8875 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Marshfield?
We do not have a EMS dispatch channel listed specifically for Marshfield. The county-level EMS dispatch channels in the same county: Cox EMS (Cox Health Systems) 150.8300 MHz, DMR, CC 7 · TG 102 · SL 1.
What scanner do I need to listen to fire and EMS in Marshfield?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Marshfield?
For Marshfield, start with the Conway 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.08125, 773.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Marshfield fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Marshfield are marked encrypted.