Skip to content

Sullivan County Fire and EMS Frequencies

Sullivan County in Missouri has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Sullivan County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sullivan County: Galt Fire Protection District 154.2350 MHz, narrow FM, 186.2 PL; Sullivan County Fire 155.4150 MHz, narrow FM, 186.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sullivan County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Galt Fire Protection DistrictGrundy County Fire/EMS (for Galt Fire Protection District)154.2350
In 150.7750
186.2 PLFMNWPMV261
Sullivan County FireSullivan County Fire – Dispatch155.4150
In 150.9950
186.2 PLFMNWQCI321

Hospitals & Medical

Hospitals & Medical frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County Memorial Hospital (Milan)Patient Reports155.3400FMNWQEY572

Radio system sites in Sullivan County

Program the control channel first; your scanner finds the voice channels from it.

Milan · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 34 (hex 22) · NAC 1C4
Control 155.115, 161.9375
Voice 161.85, 170.3875, 171.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sullivan County

Common questions

What frequency does the fire department use in Sullivan County?

Fire dispatch channels listed for Sullivan County: Galt Fire Protection District 154.2350 MHz, narrow FM, 186.2 PL; Sullivan County Fire 155.4150 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Sullivan County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sullivan County?

For Sullivan County, start with the Milan site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.115, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sullivan County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Sullivan County are marked encrypted.