Skip to content

Browning Fire and EMS Frequencies

We do not have frequencies listed specifically for Browning in Sullivan County, Missouri yet. Countywide channels for Sullivan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Milan (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 15 miles away.

Browning also extends into Linn County.

About Browning Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Browning: Galt Fire Protection District 154.2350 MHz, narrow FM, 186.2 PL; Sullivan County Fire 155.4150 MHz, narrow FM, 186.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sullivan County channels that also cover Browning

Fire Dispatch

Fire Dispatch frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Galt Fire Protection DistrictGrundy County Fire/EMS (for Galt Fire Protection District)154.2350
In 150.7750
186.2 PLFMNWPMV261
Sullivan County FireSullivan County Fire – Dispatch155.4150
In 150.9950
186.2 PLFMNWQCI321

Hospitals & Medical

Hospitals & Medical frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County Memorial Hospital (Milan)Patient Reports155.3400FMNWQEY572

Nearest trunked radio sites

Distances are measured from the center of Browning.

Milan · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 34 (hex 22) · NAC 1C4 · about 15 mi away
Control 155.115, 161.9375
Voice 161.85, 170.3875, 171.675
Brookfield 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 1 · Site 60 (hex 3C) · NAC 1C2 · about 19 mi away
Control 769.16875, 769.41875
Voice 769.66875, 769.91875, 770.16875, 770.41875
Trenton 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 27 (hex 1B) · NAC 1C2 · about 24 mi away
Control 773.03125, 773.28125
Voice 773.53125, 773.78125, 774.03125, 774.28125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Browning?

We do not have a fire dispatch channel listed specifically for Browning. The county-level fire dispatch channels in the same county: Galt Fire Protection District 154.2350 MHz, narrow FM, 186.2 PL; Sullivan County Fire 155.4150 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Browning?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Browning?

For Browning, start with the Milan site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 155.115, 161.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.