Skip to content

Senath Fire and EMS Frequencies

Senath in Dunklin County, Missouri has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Kennett 700 (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 12 miles away.

About Senath Fire and EMS Frequencies

Quick answer: Fire dispatch for Senath: Senath Fire 154.2500 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Senath conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Senath
AgencyDescriptionFrequency (MHz)ToneModeFCC
Senath FireSenath Fire – Dispatch154.2500FMNWNQS206

Nearest trunked radio sites

Distances are measured from the center of Senath.

Kennett 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 57 (hex 39) · NAC 1CF · about 12 mi away
Control 769.19375, 769.44375, 769.69375, 769.94375
Voice 770.19375, 770.44375
Bakerville · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 1 (hex 1) · NAC 1C1 · about 13 mi away
Control 169.65, 170.3875
Voice 155.595, 170.9375, 171.4375, 171.6875
Caruthersville 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 3 · Site 49 (hex 31) · NAC 1CA · about 29 mi away
Control 769.16875, 769.41875
Voice 769.66875, 769.91875, 770.16875, 770.41875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Senath?

Fire dispatch channels listed for Senath: Senath Fire 154.2500 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Senath?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Senath?

For Senath, start with the Kennett 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.19375, 769.44375, 769.69375, 769.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Senath fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Senath are marked encrypted.