About Kennett Fire and EMS Frequencies
Quick answer: Fire dispatch for Kennett: Kennett Fire 155.8200 MHz, narrow FM, 131.8 PL. Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Kennett Fire talkgroup 4724 (hex 1274).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kennett, start with the Kennett 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 2 miles away. Its control channels: 769.19375, 769.44375, 769.69375 MHz.
Data updated .
Kennett conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kennett Fire | Kennett Fire – Dispatch | 155.8200 In 154.6500 | 131.8 PL | FMN | WZU264 |
| Kennett Fire | Kennett Fire – Dispatch | 155.8200 In 159.8200 | P25 | WQMI799 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kennett Fire | Kennett Fire – D-Tactical | 155.8200 | NAC 293 | P25 | WZU264 |
Kennett trunked talkgroups
Missouri Statewide Wireless Interoperable Network (MOSWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kennett Fire | Kennett Fire – Dispatch | 4724 | 1274 | D |
| Kennett Fire | Kennett Fire/Rescue – Main | 4728 | 1278 | D |
| Kennett Fire | Kennett Fire – Tactical | 4725 | 1275 | D |
| Kennett Fire | Kennett Fire – Tactical | 4726 | 1276 | D |
Nearest trunked radio sites
Distances are measured from the center of Kennett.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kennett?
Fire dispatch channels listed for Kennett: Kennett Fire 155.8200 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Kennett?
Yes. Fire and EMS talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kennett?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kennett?
For Kennett, start with the Kennett 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.19375, 769.44375, 769.69375, 769.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kennett fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Kennett are marked encrypted.
Are Kennett fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Kennett are marked encrypted.