Skip to content

Bates County Fire and EMS Frequencies

Bates County in Missouri has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 36 cities and communities below for local fire departments and EMS agencies.

About Bates County Fire and EMS Frequencies

Quick answer: EMS dispatch for Bates County: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Bates County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Bates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bates County Memorial HospitalOperations (Dispatch-Clear, Mobiles-Encrypted)461.5625
In 466.5625
NAC 300P25 EncryptedWQLI778
Bates County Memorial HospitalBates County Memorial Hospital – Tone-Outs Only (Dispatched on P25)461.5625141.3 PLFMNWQLI778
Bates County Memorial HospitalBates County Memorial Hospital – Dispatch .462.9750
In 467.9750
141.3 PLFMNWNMB670

Hospitals & Medical

Hospitals & Medical frequencies for Bates County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bates County Memorial HospitalPatient Reports155.3400FMNKVD516

Radio system sites in Bates County

Program the control channel first; your scanner finds the voice channels from it.

Dayton / Aaron · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 2 (hex 2) · NAC 1C8
Control 154.905, 155.445
Voice 154.755, 156.2175, 169.675, 170.9125
Hume · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 9 (hex 9) · NAC 1C5
Control 170.3875, 170.9125
Voice 154.0475, 154.1525, 154.3325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bates County

Common questions

What frequency does EMS or the ambulance service use in Bates County?

EMS dispatch channels listed for Bates County: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Bates County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bates County?

For Bates County, start with the Dayton / Aaron site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.905, 155.445 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bates County fire and EMS frequencies encrypted?

1 of the 4 conventional frequencies listed for Bates County are marked encrypted; a scanner cannot decode encrypted audio.