About Adrian Fire and EMS Frequencies
Quick answer: Fire dispatch for Adrian: Adrian Fire 158.8500 MHz, narrow FM, 125 DPL. County-level ems dispatch that covers Adrian: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Adrian conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adrian Fire | Adrian Fire – Dispatch | 158.8500 In 153.8000 | 125 DPL | FMN | WPLX442 |
Bates County channels that also cover Adrian
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bates County Memorial Hospital | Operations (Dispatch-Clear, Mobiles-Encrypted) | 461.5625 In 466.5625 | NAC 300 | P25 Encrypted | WQLI778 |
| Bates County Memorial Hospital | Bates County Memorial Hospital – Tone-Outs Only (Dispatched on P25) | 461.5625 | 141.3 PL | FMN | WQLI778 |
| Bates County Memorial Hospital | Bates County Memorial Hospital – Dispatch . | 462.9750 In 467.9750 | 141.3 PL | FMN | WNMB670 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bates County Memorial Hospital | Patient Reports | 155.3400 | FMN | KVD516 |
Nearest trunked radio sites
Distances are measured from the center of Adrian.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Adrian?
Fire dispatch channels listed for Adrian: Adrian Fire 158.8500 MHz, narrow FM, 125 DPL.
What frequency does EMS or the ambulance service use in Adrian?
We do not have a EMS dispatch channel listed specifically for Adrian. The county-level EMS dispatch channels in the same county: Bates County Memorial Hospital 461.5625 MHz, narrow FM, 141.3 PL.
What scanner do I need to listen to fire and EMS in Adrian?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Adrian?
For Adrian, start with the Dayton / Aaron site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 154.905, 155.445 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Adrian fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Adrian are marked encrypted.