Skip to content

Springfield Fire and EMS Frequencies

Springfield in Washington County, Kentucky has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Springfield (KY SERVS), about 5 miles away.

About Springfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Springfield: Washington County Fire 151.0550 MHz, P25, NAC 290. County-level ems dispatch that covers Springfield: Washington County EMS 151.1450 MHz, narrow FM, 74.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Washington County Fire talkgroup 21694 (hex 54be).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Springfield, start with the Springfield site of KY SERVS, about 5 miles away. Its control channels: 774.65625 MHz.

Data updated .

Springfield conventional frequencies

EMS Talk-around

EMS Talk-around frequencies for Springfield
AgencyDescriptionFrequency (MHz)ToneModeFCC
Springfield EMSSpringfield EMS155.160082.5 PLFMKKC650

Washington County channels that also cover Springfield

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Dispatch (digital)151.0550
In 156.2250
NAC 290P25WQCW989
Washington County FireWashington County Fire – Dispatch (analog)151.0550
In 156.2250
FMNWQCW989

Fire Talk-around

Fire Talk-around frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireFire Pagers151.0550
In 156.2250
79.7 PLFMNWQCW989
Washington County FireOld Dispatch/Pagers154.9800146.2 PLFMWQAT448

EMS Dispatch

EMS Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMSWashington County EMS – Dispatch (analog)151.1450
In 156.0000
74.4 PLFMNWQCW989
Washington County EMSWashington County EMS – Dispatch (digital)151.1450
In 156.0000
NAC 293P25WQCW989
Washington County EMSEMS Pagers156.0000118.8 PLFMNWQCW989

Hospitals & Medical

Hospitals & Medical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County HospitalEMS to Springview Hospital155.3400146.2 PLFMKKC650
Washington County HospitalEMS to Hospital462.9500
In 467.9500
103.5 PLFMKKC650

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireWashington County Fire – Dispatch (County)2169454beD
Washington County FireWashington County Fire – Operations (County)2169554bfD
Washington County FireWashington County Fire – Tactical Channel (County)2169654c0D
Washington County EMSWashington County EMS – Dispatch (County)2169154bbD
Washington County EMSWashington County EMS – Operations (County)2169254bcD
Washington County EMSWashington County EMS – Tactical Channel (County)2169354bdD

Nearest trunked radio sites

Distances are measured from the center of Springfield.

Springfield · KY SERVS
RFSS 3 · Site 58 (hex 3A) · NAC 9C9 · about 5 mi away
Control 774.65625
Voice 769.33125, 771.56875, 772.49375, 773.68125
Spurlington · KY SERVS
RFSS 3 · Site 59 (hex 3B) · NAC 9C9 · about 24 mi away
Control 771.43125, 772.65625, 772.98125, 774.23125
New Bernheim · Louisville Emergency Communications Network: MetroSafe
RFSS 1 · Site 5 (hex 5) · NAC 1A5 · about 26 mi away
Control 852.3875, 853.125
Voice 851.6375, 851.8875, 852.1375, 854.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Springfield?

We do not have a fire dispatch channel listed specifically for Springfield. The county-level fire dispatch channels in the same county: Washington County Fire 151.0550 MHz, P25, NAC 290.

What frequency does EMS or the ambulance service use in Springfield?

We do not have a EMS dispatch channel listed specifically for Springfield. The county-level EMS dispatch channels in the same county: Washington County EMS 151.1450 MHz, narrow FM, 74.4 PL.

Do fire departments and EMS use a trunked radio system in Springfield?

Yes. The county-level systems that cover Springfield are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Springfield?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Springfield?

For Springfield, start with the Springfield site of KY SERVS. Its control channels are 774.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Springfield fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Springfield are marked encrypted.