About Raywick Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Raywick: Marion County EMS 155.7600 MHz, P25, NAC 127.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Raywick conventional frequencies
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Raywick Fire Dept | Raywick Fire Department | 158.7750 In 155.9850 | 043 DPL | FMN | WQGT420 |
Marion County channels that also cover Raywick
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County Fire | MCPS On Scene | 151.7000 | NAC 078 | P25 | — |
| Marion County Fire | Public Safety Backup Repeater | 155.1000 In 151.1300 | 127.3 PL | FMN | WSKT922 |
| Marion County Fire | Rescue Squad | 155.2050 In 158.9250 | 311 DPL | FMN | WNAH883 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gravel Switch Fire | Gravel Switch Fire | 151.6850 | 043 DPL | FMN | — |
| Marion County Fire | Marion County Fire – Tactical Channel | 159.1950 In 150.8050 | 192.8 PL | FMN | WPPU252 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County EMS | Marion County EMS – Dispatch | 155.7600 In 158.9700 | NAC 127 | P25 | WSHM713 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County EMS | Ambulance Service | 155.1600 | 85.4 PL | FMN | WQOV746 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County Hospital | Ambulance to Springview Hospital | 155.3400 | 146.2 PL | FMN | WQOV746 |
Nearest trunked radio sites
Distances are measured from the center of Raywick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Raywick?
We do not have a EMS dispatch channel listed specifically for Raywick. The county-level EMS dispatch channels in the same county: Marion County EMS 155.7600 MHz, P25, NAC 127.
What scanner do I need to listen to fire and EMS in Raywick?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Raywick?
For Raywick, start with the Barren River Lake State Park site of KY SERVS. Its control channels are 774.49375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Raywick fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Raywick are marked encrypted.