Skip to content

Simpson County Fire and EMS Frequencies

Simpson County in Kentucky has 3 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Simpson County Fire and EMS Frequencies

Quick answer: Fire dispatch for Simpson County: Simpson County Fire 453.6500 MHz, narrow FM, 125 DPL. EMS dispatch for Simpson County: Simpson County EMS 453.8125 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: KY SERVS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Simpson County, start with the Franklin site of KY SERVS. Its control channels: 771.41875 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Simpson County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Simpson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Simpson County FireFire/EMS Dispatch453.6500
In 458.6500
125 DPLFMNWPJU970

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Simpson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Simpson County FireSCEMA Tactical159.1200
In 153.8150
127.3 PLFMNWNML830

EMS Dispatch

EMS Dispatch frequencies for Simpson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Simpson County EMSSimpson County EMS – Dispatch453.8125
In 458.8125
FMN—

Simpson County trunked talkgroups

KY SERVS

2 encrypted talkgroups (cannot be monitored)
KY SERVS encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Simpson County FireFranklin-Simpson Fire Department267716893D Encrypted
Simpson County EMSSimpson Co EMS267766898D Encrypted

Radio system sites in Simpson County

Program the control channel first; your scanner finds the voice channels from it.

Franklin · KY SERVS
RFSS 3 · Site 86 (hex 56) · NAC 9C0
Control 771.41875
Voice 771.71875, 772.08125, 772.34375, 774.45625, 774.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Simpson County

Common questions

What frequency does the fire department use in Simpson County?

Fire dispatch channels listed for Simpson County: Simpson County Fire 453.6500 MHz, narrow FM, 125 DPL.

What frequency does EMS or the ambulance service use in Simpson County?

EMS dispatch channels listed for Simpson County: Simpson County EMS 453.8125 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Simpson County?

Yes. Fire and EMS talkgroups are listed for KY SERVS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Simpson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Simpson County?

For Simpson County, start with the Franklin site of KY SERVS. Its control channels are 771.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Simpson County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Simpson County are marked encrypted.

Are Simpson County fire and EMS talkgroups encrypted?

2 of the 2 talkgroups listed for Simpson County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.