About Franklin Fire and EMS Frequencies
Quick answer: Fire dispatch for Franklin: Franklin Fire 453.0750 MHz, narrow FM, no tone. EMS dispatch for Franklin: Franklin EMS 453.5125 MHz, narrow FM, 023 DPL.
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: KY SERVS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Franklin, start with the Franklin site of KY SERVS, about 2 miles away. Its control channels: 771.41875 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Franklin conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin Fire | Franklin Fire – Dispatch | 453.0750 In 458.0750 | FMN | WPTQ805 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin Fire | Tactical B | 453.1500 In 458.1500 | 071 DPL | FMN | WPRW369 |
| Franklin Fire | Tactical C | 458.1750 | 071 DPL | FMN | WPRW369 |
| Franklin Fire | Tactical A | 466.8375 | 125 DPL | FMN | WPRW369 |
| Franklin Fire | Tactical D | 467.8125 | 167.9 PL | FMN | WPRW369 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin Fire | Franklin Fire – Alternate | 453.1750 | 017 DPL | FMN | WPTQ805 |
| Franklin Fire | Franklin Fire – Alternate | 453.7500 In 458.7500 | 156.7 PL | FMN | KBO843 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin EMS | Franklin EMS – Dispatch | 453.5125 In 458.5125 | 023 DPL | FMN | WPRW369 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin EMS | EMS Administration | 453.6875 In 458.6875 | 025 DPL | FMN | WPRW369 |
Simpson County channels that also cover Franklin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Simpson County Fire | Fire/EMS Dispatch | 453.6500 In 458.6500 | 125 DPL | FMN | WPJU970 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Simpson County Fire | SCEMA Tactical | 159.1200 In 153.8150 | 127.3 PL | FMN | WNML830 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Simpson County EMS | Simpson County EMS – Dispatch | 453.8125 In 458.8125 | FMN | — |
KY SERVS
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Simpson County Fire | Franklin-Simpson Fire Department | 26771 | 6893 | D Encrypted |
| Simpson County EMS | Simpson Co EMS | 26776 | 6898 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Franklin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Franklin?
Fire dispatch channels listed for Franklin: Franklin Fire 453.0750 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Franklin?
EMS dispatch channels listed for Franklin: Franklin EMS 453.5125 MHz, narrow FM, 023 DPL.
Do fire departments and EMS use a trunked radio system in Franklin?
Yes. The county-level systems that cover Franklin are Fire and EMS talkgroups are listed for KY SERVS: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Franklin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Franklin?
For Franklin, start with the Franklin site of KY SERVS. Its control channels are 771.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Franklin fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Franklin are marked encrypted.