Skip to content

Ohio County Fire and EMS Frequencies

Ohio County in Kentucky has 9 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Ohio County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ohio County: Ohio County Fire 154.2350 MHz, narrow FM, 118.8 PL. EMS dispatch for Ohio County: Ohio County EMS 155.9550 MHz, narrow FM, 118.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Ohio County Fire talkgroup 21544 (hex 5428).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 6 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ohio County, start with the Hartford site of KY SERVS. Its control channels: 771.30625, 771.86875, 772.48125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Ohio County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County FireOhio County Fire – Dispatch154.2350
In 159.3000
118.8 PLFMNWNJR463

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County FireOhio County Fire – Repeater151.2200
In 156.1500
FMNWNYW758
Ohio County FireOhio County Fire – Fire Ground154.0100NXDN96WPIV930
Ohio County FireOhio County Fire – Fire Ground154.0700NXDN96WPIV930
Ohio County FireOhio County Fire – Fire Ground154.1600NXDN96WNJR463

EMS Dispatch

EMS Dispatch frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County EMSOhio County EMS – Dispatch155.9550
In 151.0700
RAN 32NXDN96 EncryptedKIG918
Ohio County EMSOhio County EMS – Dispatch155.9550
In 151.0700
118.8 PLFMNKIG918

EMS Talk-around

EMS Talk-around frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County EMSOhio County EMS – On Scene155.1600NXDN96WNYT337

Hospitals & Medical

Hospitals & Medical frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County HospitalEMS-to-Hospital155.3400NXDN96KXF674

Ohio County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Ohio County FireOhio County Fire – Dispatch215445428D
Ohio County FireOhio County Fire – Operations215455429D
Ohio County FireOhio County Fire – Operations21546542aD
Ohio County EMSOhio County EMS – Operations215395423D

Radio system sites in Ohio County

Program the control channel first; your scanner finds the voice channels from it.

Hartford · KY SERVS
RFSS 3 · Site 67 (hex 43) · NAC 9C7
Control 771.30625, 771.86875, 772.48125, 772.79375
Voice 769.30625, 770.54375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ohio County

Common questions

What frequency does the fire department use in Ohio County?

Fire dispatch channels listed for Ohio County: Ohio County Fire 154.2350 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in Ohio County?

EMS dispatch channels listed for Ohio County: Ohio County EMS 155.9550 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Ohio County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ohio County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ohio County?

For Ohio County, start with the Hartford site of KY SERVS. Its control channels are 771.30625, 771.86875, 772.48125, 772.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ohio County fire and EMS frequencies encrypted?

1 of the 9 conventional frequencies listed for Ohio County are marked encrypted; a scanner cannot decode encrypted audio.

Are Ohio County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Ohio County are marked encrypted.