Skip to content

McHenry Fire and EMS Frequencies

We do not have frequencies listed specifically for McHenry in Ohio County, Kentucky yet. Countywide channels for Ohio County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hartford (KY SERVS), about 8 miles away.

About McHenry Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers McHenry: Ohio County Fire 154.2350 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers McHenry: Ohio County EMS 155.9550 MHz, narrow FM, 118.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Ohio County Fire talkgroup 21544 (hex 5428).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 6 conventional channels use a digital mode (NXDN96), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McHenry, start with the Hartford site of KY SERVS, about 8 miles away. Its control channels: 771.30625, 771.86875, 772.48125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Ohio County channels that also cover McHenry

Fire Dispatch

Fire Dispatch frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County FireOhio County Fire – Dispatch154.2350
In 159.3000
118.8 PLFMNWNJR463

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County FireOhio County Fire – Repeater151.2200
In 156.1500
FMNWNYW758
Ohio County FireOhio County Fire – Fire Ground154.0100NXDN96WPIV930
Ohio County FireOhio County Fire – Fire Ground154.0700NXDN96WPIV930
Ohio County FireOhio County Fire – Fire Ground154.1600NXDN96WNJR463

EMS Dispatch

EMS Dispatch frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County EMSOhio County EMS – Dispatch155.9550
In 151.0700
RAN 32NXDN96 EncryptedKIG918
Ohio County EMSOhio County EMS – Dispatch155.9550
In 151.0700
118.8 PLFMNKIG918

EMS Talk-around

EMS Talk-around frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County EMSOhio County EMS – On Scene155.1600NXDN96WNYT337

Hospitals & Medical

Hospitals & Medical frequencies for Ohio County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ohio County HospitalEMS-to-Hospital155.3400NXDN96KXF674

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Ohio County FireOhio County Fire – Dispatch215445428D
Ohio County FireOhio County Fire – Operations215455429D
Ohio County FireOhio County Fire – Operations21546542aD
Ohio County EMSOhio County EMS – Operations215395423D

Nearest trunked radio sites

Distances are measured from the center of McHenry.

Hartford · KY SERVS
RFSS 3 · Site 67 (hex 43) · NAC 9C7 · about 8 mi away
Control 771.30625, 771.86875, 772.48125, 772.79375
Voice 769.30625, 770.54375
Dunmore · KY SERVS
RFSS 3 · Site 115 (hex 73) · NAC 9CF · about 15 mi away
Control 771.04375, 771.39375, 771.90625, 772.36875
Voice 769.25625, 770.03125
Greenville · KY SERVS
RFSS 3 · Site 118 (hex 76) · NAC 9C8 · about 15 mi away
Control 773.13125, 773.48125, 773.73125, 774.65625
Voice 772.45625, 772.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in McHenry?

We do not have a fire dispatch channel listed specifically for McHenry. The county-level fire dispatch channels in the same county: Ohio County Fire 154.2350 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in McHenry?

We do not have a EMS dispatch channel listed specifically for McHenry. The county-level EMS dispatch channels in the same county: Ohio County EMS 155.9550 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in McHenry?

Yes. The county-level systems that cover McHenry are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McHenry?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McHenry?

For McHenry, start with the Hartford site of KY SERVS. Its control channels are 771.30625, 771.86875, 772.48125, 772.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.