About Flatwoods Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Flatwoods: E-911 Fire 154.1900 MHz, narrow FM, 131.8 PL; E-911 Fire 2 155.1300 MHz, narrow FM, 306 DPL; E-911 Fire 4 151.3325 MHz, narrow FM, 212 DPL. County-level ems dispatch that covers Flatwoods: Greenup County EMS 154.1675 MHz, narrow FM, 654 DPL.
- 14 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Greenup County channels that also cover Flatwoods
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| E-911 Fire | E-911 Fire (West Repeater) | 154.1900 In 150.7900 | 131.8 PL | FMN | WPPZ335 |
| E-911 Fire | E-911 Fire (South Repeater) | 154.3100 In 159.0975 | 151.4 PL | FMN | WPPZ335 |
| E-911 Fire | E-911 Fire (Flatwoods Fire Department call out only) | 154.3400 In 153.8300 | 167.9 PL | FMN | WNAJ827 |
| E-911 Fire | E-911 Fire | 154.4150 In 151.2050 | 271 DPL | FMN | WPTY891 |
| E-911 Fire 2 | E-911 Fire | 155.1300 In 151.3850 | 306 DPL | FMN | KXB547 |
| E-911 Fire 4 | E-911 Fire | 151.3325 In 156.0675 | 212 DPL | FMN | WQRU349 |
| E-911 Fire 6 | E-911 Fire | 155.0625 In 158.9925 | 134 DPL | FMN | WRNB469 |
| E-911 Fire 9 | E-911 Fire | 154.4450 In 150.8050 | 107.2 PL | FMN | WPLX457 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenup County Fire | FIRE F10 Rescue/LZ | 155.2650 | 107.2 PL | FMN | WPXX305 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenup County Fire | Command 42 FIRE | 156.0300 | 162 DPL | FMN | WQRN755 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenup County EMS | Greenup County EMS – Dispatch | 154.1675 In 155.9775 | 654 DPL | FMN | WRUA282 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| COMMAND 43 EMS | Command 43 EMS | 159.4050 | 162 DPL | FMN | WQRN755 |
| Greenup County EMS | GMAC | 151.9175 In 160.2075 | 271 DPL | FMN | KD46981 |
| Greenup County EMS | EMS-2 WEST | 160.1100 In 173.2750 | 271 DPL | FMN | WQPD946 |
Nearest trunked radio sites
Distances are measured from the center of Flatwoods.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Flatwoods?
We do not have a fire dispatch channel listed specifically for Flatwoods. The county-level fire dispatch channels in the same county: E-911 Fire 154.1900 MHz, narrow FM, 131.8 PL; E-911 Fire 2 155.1300 MHz, narrow FM, 306 DPL; E-911 Fire 4 151.3325 MHz, narrow FM, 212 DPL; E-911 Fire 6 155.0625 MHz, narrow FM, 134 DPL.
What frequency does EMS or the ambulance service use in Flatwoods?
We do not have a EMS dispatch channel listed specifically for Flatwoods. The county-level EMS dispatch channels in the same county: Greenup County EMS 154.1675 MHz, narrow FM, 654 DPL.
What scanner do I need to listen to fire and EMS in Flatwoods?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Flatwoods?
For Flatwoods, start with the Courthouse site of Bath County Emergency Communications Network. Its control channels are 453.475 MHz. Program a control channel first; the scanner finds the voice channels from it.