About Grayson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Grayson: Carter County Fire 151.3250 MHz, narrow FM, 127.3 PL; Norton Branch FD Fire 154.7475 MHz, narrow FM, 023 DPL. County-level ems dispatch that covers Grayson: Carter County EMS 154.0325 MHz, narrow FM, 127.3 PL.
- 15 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Carter County channels that also cover Grayson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carter County Fire | East (Mayhew) | 151.3250 | 127.3 PL | FMN | WNFH723 |
| Carter County Fire | Fire Center (Bailey) | 154.3550 In 153.8900 | 127.3 PL | FMN | WNFH723 |
| Carter County Fire | West (Garvin) | 155.1900 | 127.3 PL | FMN | WNFH723 |
| Carter County Fire | North (Sand Ridge) | 159.1500 | 127.3 PL | FMN | WNFH723 |
| Norton Branch FD Fire | Norton Branch Fire Department | 154.7475 | 023 DPL | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carter County Fire | Mutual Aid (Grayson Fire Department CH. 4) | 154.2650 | 127.3 PL | FMN | WPPV275 |
| Carter Fire F2 | Carter Fire F2 | 154.1450 | 127.3 PL | FMN | KNJG733 |
| Carter Fire F4 | Carter Fire F4 | 153.4550 In 153.7800 | 127.3 PL | FMN | WPPV275 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carter County Fire | Fire Department- UHF Link | 453.1375 In 458.1375 | FMN | WNFH723 | |
| Carter Fire F5 | Carter Fire F5 | 154.3700 | 127.3 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carter County EMS | East (Mayhew) | 154.0325 In 159.4575 | 127.3 PL | FMN | WPYX844 |
| Carter County EMS | West (Garvin) | 154.9875 | 127.3 PL | FMN | WPUV513 |
| Carter County EMS | EMS Center (Bailey) | 155.1150 In 159.1125 | 127.3 PL | FMN | WPUV513 |
| Carter County EMS | North (Sand Ridge) | 158.8125 | 127.3 PL | FMN | WPUV513 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carter Fire F6 | Carter Fire F6 | 154.2650 In 159.0150 | 127.3 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Grayson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Grayson?
We do not have a fire dispatch channel listed specifically for Grayson. The county-level fire dispatch channels in the same county: Carter County Fire 151.3250 MHz, narrow FM, 127.3 PL; Norton Branch FD Fire 154.7475 MHz, narrow FM, 023 DPL.
What frequency does EMS or the ambulance service use in Grayson?
We do not have a EMS dispatch channel listed specifically for Grayson. The county-level EMS dispatch channels in the same county: Carter County EMS 154.0325 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in Grayson?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Grayson?
For Grayson, start with the Courthouse site of Bath County Emergency Communications Network. Its control channels are 453.475 MHz. Program a control channel first; the scanner finds the voice channels from it.