Skip to content

Sandy Hook Fire and EMS Frequencies

Sandy Hook in Elliott County, Kentucky has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Courthouse (Bath County Emergency Communications Network), about 34 miles away.

About Sandy Hook Fire and EMS Frequencies

Quick answer: Fire dispatch for Sandy Hook: Sandy Hook Fire and Rescue 159.2400 MHz, FM, 136.5 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sandy Hook conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sandy Hook
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sandy Hook Fire and RescueSandy Hook Fire and Rescue159.2400
In 153.8150
136.5 PLFMWQOK379

Elliott County channels that also cover Sandy Hook

Fire Dispatch

Fire Dispatch frequencies for Elliott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Isonville Volunteer Fire Dept.Isonville Fire155.9550
In 150.8050
146.2 PLFMWPWC878
Route 504 Volunteer Fire DepartmentRoute 504 Volunteer Fire Department155.0550
In 159.3600
205 DPLFMWQCP593

EMS Talk-around

EMS Talk-around frequencies for Elliott County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Elliott County EMSEMS/Sheriff Dispatch155.1900
In 159.3150
210.7 PLFMWQBZ796
Elliott County EMSElliott County EMS – Alternate155.3400FMKNIN342

Nearest trunked radio sites

Distances are measured from the center of Sandy Hook.

Courthouse · Bath County Emergency Communications Network
RFSS 7 · Site 7 (hex 7) · NAC 064 · about 34 mi away
Control 453.475
Voice 453.1875, 453.75, 460.1375, 460.55
Sharpsburg · Bath County Emergency Communications Network
RFSS 6 · Site 6 (hex 6) · NAC 064 · about 34 mi away
Control 453.925
Voice 453.2625, 453.675, 460.075, 460.625
Preston · Bath County Emergency Communications Network
RFSS 3 · Site 3 (hex 3) · NAC 064 · about 34 mi away
Control 453.2, 460.125
Voice 453.05, 453.425, 453.7, 460.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sandy Hook?

Fire dispatch channels listed for Sandy Hook: Sandy Hook Fire and Rescue 159.2400 MHz, FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Sandy Hook?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sandy Hook?

For Sandy Hook, start with the Courthouse site of Bath County Emergency Communications Network. Its control channels are 453.475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sandy Hook fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Sandy Hook are marked encrypted.