Skip to content

Morton County Fire and EMS Frequencies

Morton County in Kansas has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Morton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Morton County: Morton County Fire 155.7150 MHz, narrow FM, 162.2 PL. EMS dispatch for Morton County: Morton County EMS 155.7900 MHz, narrow FM, 162.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Morton County Fire talkgroup 2763 (hex acb).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Morton County, start with the Richfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 852.1125, 852.4125 MHz.

Data updated .

Morton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Morton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morton County FireMorton County Fire – Dispatch155.7150
In 153.9950
162.2 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Morton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morton County EMSMorton County EMS – Dispatch155.7900
In 153.9950
162.2 PLFMNWQFI386

Morton County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Morton County FireMorton County Fire – Dispatch2763acbD

Radio system sites in Morton County

Program the control channel first; your scanner finds the voice channels from it.

Richfield · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 34 (hex 22)
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Morton County

Common questions

What frequency does the fire department use in Morton County?

Fire dispatch channels listed for Morton County: Morton County Fire 155.7150 MHz, narrow FM, 162.2 PL.

What frequency does EMS or the ambulance service use in Morton County?

EMS dispatch channels listed for Morton County: Morton County EMS 155.7900 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Morton County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Morton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Morton County?

For Morton County, start with the Richfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Morton County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Morton County are marked encrypted.

Are Morton County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Morton County are marked encrypted.