About Rolla Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Rolla: Morton County Fire 155.7150 MHz, narrow FM, 162.2 PL. County-level ems dispatch that covers Rolla: Morton County EMS 155.7900 MHz, narrow FM, 162.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Morton County Fire talkgroup 2763 (hex acb).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rolla, start with the Richfield site of Kansas Statewide Interoperable Communication System (KSICS), about 12 miles away. Its control channels: 852.1125, 852.4125 MHz.
Data updated .
Morton County channels that also cover Rolla
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morton County Fire | Morton County Fire – Dispatch | 155.7150 In 153.9950 | 162.2 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morton County EMS | Morton County EMS – Dispatch | 155.7900 In 153.9950 | 162.2 PL | FMN | WQFI386 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Morton County Fire | Morton County Fire – Dispatch | 2763 | acb | D |
Nearest trunked radio sites
Distances are measured from the center of Rolla.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rolla?
We do not have a fire dispatch channel listed specifically for Rolla. The county-level fire dispatch channels in the same county: Morton County Fire 155.7150 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Rolla?
We do not have a EMS dispatch channel listed specifically for Rolla. The county-level EMS dispatch channels in the same county: Morton County EMS 155.7900 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Rolla?
Yes. The county-level systems that cover Rolla are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rolla?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rolla?
For Rolla, start with the Richfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.