Skip to content

Bourbon County Fire and EMS Frequencies

Bourbon County in Kansas has 4 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 28 cities and communities below for local fire departments and EMS agencies.

About Bourbon County Fire and EMS Frequencies

Quick answer: EMS dispatch for Bourbon County: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Bourbon County EMS talkgroup 614 (hex 266).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bourbon County, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels: 851.625, 852.2 MHz.

Data updated .

Bourbon County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County FireFire District 3 Tactical150.790082.5 PLFMNWQCV858
Bourbon County FireFire District 3 Tactical158.760082.5 PLFMNWQCV858
Bourbon County FireRural Fire Dispatch / Emergency Management159.1200
In 154.8300
82.5 PLFMNKNFP357

EMS Dispatch

EMS Dispatch frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County EMSBourbon County EMS – Dispatch155.5650
In 158.9100
CC 11 · TG 430012 · SL 2DMRKAC980

Bourbon County trunked talkgroups

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Bourbon County EMSBourbon County EMS – Dispatch614266D

Radio system sites in Bourbon County

Program the control channel first; your scanner finds the voice channels from it.

Xenia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 10 (hex A) · NAC 1BB
Control 851.625, 852.2
Voice 851.375, 852.55, 853.175, 853.3, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bourbon County

Common questions

What frequency does EMS or the ambulance service use in Bourbon County?

EMS dispatch channels listed for Bourbon County: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2.

Do fire departments and EMS use a trunked radio system in Bourbon County?

Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bourbon County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bourbon County?

For Bourbon County, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.625, 852.2 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bourbon County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Bourbon County are marked encrypted.

Are Bourbon County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Bourbon County are marked encrypted.