Skip to content

Barnesville Fire and EMS Frequencies

We do not have frequencies listed specifically for Barnesville in Bourbon County, Kansas yet. Countywide channels for Bourbon County that may also cover this area are shown below when we have them.

About Barnesville Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Barnesville: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Bourbon County EMS talkgroup 614 (hex 266).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.

Data updated .

Bourbon County channels that also cover Barnesville

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County FireFire District 3 Tactical150.790082.5 PLFMNWQCV858
Bourbon County FireFire District 3 Tactical158.760082.5 PLFMNWQCV858
Bourbon County FireRural Fire Dispatch / Emergency Management159.1200
In 154.8300
82.5 PLFMNKNFP357

EMS Dispatch

EMS Dispatch frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County EMSBourbon County EMS – Dispatch155.5650
In 158.9100
CC 11 · TG 430012 · SL 2DMRKAC980

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Bourbon County EMSBourbon County EMS – Dispatch614266D

Common questions

What frequency does EMS or the ambulance service use in Barnesville?

We do not have a EMS dispatch channel listed specifically for Barnesville. The county-level EMS dispatch channels in the same county: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2.

Do fire departments and EMS use a trunked radio system in Barnesville?

Yes. The county-level systems that cover Barnesville are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Barnesville?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.