About Winnebago County Fire and EMS Frequencies
Quick answer: Fire dispatch for Winnebago County: Winnebago County Fire 154.4000 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Winnebago County Fire talkgroup 62512 (hex f430).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Winnebago County, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.78125, 774.03125, 774.28125 MHz.
Data updated .
Winnebago County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Winnebago County Fire | Winnebago County Fire – Dispatch | 154.4000 | FM | WNCE399 |
Winnebago County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Winnebago County Fire | Winnebago County Fire – Dispatch | 62512 | f430 | T |
| Winnebago County Fire | Winnebago County Fire – Tactical Channel | 62513 | f431 | T |
| Winnebago County Fire | Winnebago County Fire – Tactical Channel | 62514 | f432 | T |
| Winnebago County EMS | Winnebago County EMS – Dispatch | 62515 | f433 | T |
| Winnebago County EMS | Winnebago County EMS – Tactical Channel | 62516 | f434 | T |
| Winnebago County EMS | Winnebago County EMS – Tactical Channel | 62517 | f435 | T |
Radio system sites in Winnebago County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Winnebago County
Common questions
What frequency does the fire department use in Winnebago County?
Fire dispatch channels listed for Winnebago County: Winnebago County Fire 154.4000 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Winnebago County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Winnebago County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Winnebago County?
For Winnebago County, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Winnebago County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Winnebago County are marked encrypted.
Are Winnebago County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Winnebago County are marked encrypted.