Skip to content

Rake Fire and EMS Frequencies

We do not have frequencies listed specifically for Rake in Winnebago County, Iowa yet. Countywide channels for Winnebago County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Leland (Iowa Statewide Interoperable Communications System (ISICS)), about 16 miles away.

About Rake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rake: Winnebago County Fire 154.4000 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Winnebago County Fire talkgroup 62512 (hex f430).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rake, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS), about 16 miles away. Its control channels: 773.78125, 774.03125, 774.28125 MHz.

Data updated .

Winnebago County channels that also cover Rake

Fire Dispatch

Fire Dispatch frequencies for Winnebago County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winnebago County FireWinnebago County Fire – Dispatch154.4000FMWNCE399

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Winnebago County FireWinnebago County Fire – Dispatch62512f430T
Winnebago County FireWinnebago County Fire – Tactical Channel62513f431T
Winnebago County FireWinnebago County Fire – Tactical Channel62514f432T
Winnebago County EMSWinnebago County EMS – Dispatch62515f433T
Winnebago County EMSWinnebago County EMS – Tactical Channel62516f434T
Winnebago County EMSWinnebago County EMS – Tactical Channel62517f435T

Nearest trunked radio sites

Distances are measured from the center of Rake.

Leland · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 92 (hex 5C) · NAC 4C2 · about 16 mi away
Control 773.78125, 774.03125, 774.28125
Voice 773.03125, 773.53125
Burt · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 55 (hex 37) · NAC 4C5 · about 25 mi away
Control 769.91875, 770.16875, 770.41875
Voice 769.16875, 769.41875, 769.66875
Joice · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 98 (hex 62) · NAC 4C2 · about 27 mi away
Control 770.94375, 774.56875, 774.81875
Voice 770.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rake?

We do not have a fire dispatch channel listed specifically for Rake. The county-level fire dispatch channels in the same county: Winnebago County Fire 154.4000 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Rake?

Yes. The county-level systems that cover Rake are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rake?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rake?

For Rake, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.