About Warren County Fire and EMS Frequencies
Quick answer: Fire dispatch for Warren County: Warren County Fire 154.3700 MHz, FM, 85.4 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Warren County Fire talkgroup 59940 (hex ea24).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Warren County, start with the Warren Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 773.06875, 773.31875, 774.06875 MHz.
Data updated .
Warren County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Fire | Warren County Fire – Dispatch | 154.3700 | 85.4 PL | FM | WPYG970 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Fire | Warren County Fire – Fire Ground | 153.8300 | FM | WPYG970 | |
| Warren County Fire | Warren County Fire – Fire Ground | 153.8900 | FM | WPYG970 | |
| Warren County Fire | Warren County Fire – Fire Ground | 154.2050 | 047 DPL | FM | WPYG970 |
Warren County trunked talkgroups
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warren County Fire | Dispatch Patch- 154.370 | 59940 | ea24 | T |
| Warren County Fire | Warren County Fire – Fire Ground | 59941 | ea25 | T |
| Warren County Fire | Warren County Fire – Fire Ground | 59942 | ea26 | T |
Radio system sites in Warren County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Warren County
Common questions
What frequency does the fire department use in Warren County?
Fire dispatch channels listed for Warren County: Warren County Fire 154.3700 MHz, FM, 85.4 PL.
Do fire departments and EMS use a trunked radio system in Warren County?
Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Warren County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Warren County?
For Warren County, start with the Warren Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.06875, 773.31875, 774.06875, 774.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Warren County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Warren County are marked encrypted.
Are Warren County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Warren County are marked encrypted.