Skip to content

Sac County Fire and EMS Frequencies

Sac County in Iowa has 5 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Sac County Fire and EMS Frequencies

Quick answer: Fire dispatch for Sac County: Sac County Fire 154.3550 MHz, narrow FM, CSQ. EMS dispatch for Sac County: Sac County EMS 462.9750 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Sac County Fire talkgroup 54528 (hex d500).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sac County, start with the Sac Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels: 770.66875, 770.91875, 774.54375 MHz.

Data updated .

Sac County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sac County FireFire/EMS Dispatch154.3550CSQFMNKDO203
Sac County FireFire/EMS Operations155.7150CSQFMNKMA723
Sac County FireRelay for Fire Dispatch460.6000CSQFMNKDO203

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sac County FireSac County Fire – Fire Ground154.1300FMNKDO203

EMS Dispatch

EMS Dispatch frequencies for Sac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sac County EMSRelay for EMS Dispatch462.9750CSQFMNKMA723

Sac County trunked talkgroups

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Sac County FireSac County Fire – Dispatch54528d500T
Sac County EMSSac County EMS – Dispatch54515d4f3T

Radio system sites in Sac County

Program the control channel first; your scanner finds the voice channels from it.

Sac Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 62 (hex 3E) · NAC 4C2
Control 770.66875, 770.91875, 774.54375, 774.79375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sac County

Common questions

What frequency does the fire department use in Sac County?

Fire dispatch channels listed for Sac County: Sac County Fire 154.3550 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Sac County?

EMS dispatch channels listed for Sac County: Sac County EMS 462.9750 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Sac County?

Yes. Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sac County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sac County?

For Sac County, start with the Sac Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.66875, 770.91875, 774.54375, 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sac County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Sac County are marked encrypted.

Are Sac County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Sac County are marked encrypted.