About Early Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Early: Sac County Fire 154.3550 MHz, narrow FM, CSQ. County-level ems dispatch that covers Early: Sac County EMS 462.9750 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Sac County Fire talkgroup 54528 (hex d500).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Early, start with the Sac Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 6 miles away. Its control channels: 770.66875, 770.91875, 774.54375 MHz.
Data updated .
Sac County channels that also cover Early
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sac County Fire | Fire/EMS Dispatch | 154.3550 | CSQ | FMN | KDO203 |
| Sac County Fire | Fire/EMS Operations | 155.7150 | CSQ | FMN | KMA723 |
| Sac County Fire | Relay for Fire Dispatch | 460.6000 | CSQ | FMN | KDO203 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sac County Fire | Sac County Fire – Fire Ground | 154.1300 | FMN | KDO203 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sac County EMS | Relay for EMS Dispatch | 462.9750 | CSQ | FMN | KMA723 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sac County Fire | Sac County Fire – Dispatch | 54528 | d500 | T |
| Sac County EMS | Sac County EMS – Dispatch | 54515 | d4f3 | T |
Nearest trunked radio sites
Distances are measured from the center of Early.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Early?
We do not have a fire dispatch channel listed specifically for Early. The county-level fire dispatch channels in the same county: Sac County Fire 154.3550 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Early?
We do not have a EMS dispatch channel listed specifically for Early. The county-level EMS dispatch channels in the same county: Sac County EMS 462.9750 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Early?
Yes. The county-level systems that cover Early are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Early?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Early?
For Early, start with the Sac Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.66875, 770.91875, 774.54375, 774.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.