Skip to content

O'Brien County Fire and EMS Frequencies

O'Brien County in Iowa has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About O'Brien County Fire and EMS Frequencies

Quick answer: Fire dispatch for O'Brien County: O'Brien County Fire 154.3700 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

O'Brien County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for O'Brien County
AgencyDescriptionFrequency (MHz)ToneModeFCC
O'Brien County FireFire/EMS Dispatch154.3700
In 158.7300
FMNKLG478
O'Brien County FireFire Link452.1000FMKNFY453
O'Brien County FireFire Link457.1000FMNKNFY453

EMS Tactical

EMS Tactical frequencies for O'Brien County
AgencyDescriptionFrequency (MHz)ToneModeFCC
O'Brien County EMSRegional EMS155.4000FMWRA646

Radio system sites in O'Brien County

Program the control channel first; your scanner finds the voice channels from it.

Sanborn · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 71 (hex 47)
Control 770.40625
Voice 769.15625, 769.40625, 769.65625, 769.90625, 770.15625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in O'Brien County

Common questions

What frequency does the fire department use in O'Brien County?

Fire dispatch channels listed for O'Brien County: O'Brien County Fire 154.3700 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in O'Brien County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in O'Brien County?

For O'Brien County, start with the Sanborn site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are O'Brien County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for O'Brien County are marked encrypted.