Skip to content

Archer Fire and EMS Frequencies

We do not have frequencies listed specifically for Archer in O'Brien County, Iowa yet. Countywide channels for O'Brien County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sanborn (Iowa Statewide Interoperable Communications System (ISICS)), about 9 miles away.

About Archer Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Archer: O'Brien County Fire 154.3700 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

O'Brien County channels that also cover Archer

Fire Dispatch

Fire Dispatch frequencies for O'Brien County
AgencyDescriptionFrequency (MHz)ToneModeFCC
O'Brien County FireFire/EMS Dispatch154.3700
In 158.7300
FMNKLG478
O'Brien County FireFire Link452.1000FMKNFY453
O'Brien County FireFire Link457.1000FMNKNFY453

EMS Tactical

EMS Tactical frequencies for O'Brien County
AgencyDescriptionFrequency (MHz)ToneModeFCC
O'Brien County EMSRegional EMS155.4000FMWRA646

Nearest trunked radio sites

Distances are measured from the center of Archer.

Sanborn · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 71 (hex 47) · about 9 mi away
Control 770.40625
Voice 769.15625, 769.40625, 769.65625, 769.90625, 770.15625
Cherokee · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 22 (hex 16) · NAC 4C3 · about 22 mi away
Control 774.03125, 774.28125, 774.78125
Voice 773.03125, 773.28125, 773.53125, 773.78125
Rock Rapids · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 51 (hex 33) · NAC 4C2 · about 29 mi away
Control 773.34375, 774.59375, 774.84375
Voice 773.09375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Archer?

We do not have a fire dispatch channel listed specifically for Archer. The county-level fire dispatch channels in the same county: O'Brien County Fire 154.3700 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Archer?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Archer?

For Archer, start with the Sanborn site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 770.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.