Skip to content

Marshall County Fire and EMS Frequencies

Marshall County in Iowa has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 14 cities and communities below for local fire departments and EMS agencies.

About Marshall County Fire and EMS Frequencies

Quick answer: Fire dispatch for Marshall County: Marshall County Fire 154.3850 MHz, narrow FM, 82.5 PL. EMS dispatch for Marshall County: Marshall County EMS 155.1600 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Marshall County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County FireMarshall County Fire – Dispatch154.3850
In 159.0375
82.5 PLFMNKGK678

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County FireMarshall County Fire – Fire Ground151.1525CSQFMNKGK678
Marshall County FireMarshall County Fire – Fire Ground159.3750CSQFMNKGK678

EMS Dispatch

EMS Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County EMSEMS Paging155.1600FMNWYK322

Radio system sites in Marshall County

Program the control channel first; your scanner finds the voice channels from it.

Marshalltown · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 64 (hex 40) · NAC 4C1
Control 773.83125, 774.08125, 774.33125
Voice 773.08125, 773.33125, 773.58125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Marshall County

Common questions

What frequency does the fire department use in Marshall County?

Fire dispatch channels listed for Marshall County: Marshall County Fire 154.3850 MHz, narrow FM, 82.5 PL.

What frequency does EMS or the ambulance service use in Marshall County?

EMS dispatch channels listed for Marshall County: Marshall County EMS 155.1600 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Marshall County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Marshall County?

For Marshall County, start with the Marshalltown site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.83125, 774.08125, 774.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Marshall County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Marshall County are marked encrypted.