About Earlham Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Earlham: Madison County Fire 154.1900 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Earlham: Madison County EMS 155.2500 MHz, narrow FM, CSQ. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Madison County Fire talkgroup 42232 (hex a4f8).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Earlham, start with the Winterset site of Iowa Statewide Interoperable Communications System (ISICS), about 12 miles away. Its control channels: 773.04375, 773.54375, 774.04375 MHz.
Data updated .
Madison County channels that also cover Earlham
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County Fire | Madison County Fire – Dispatch | 154.1900 | 192.8 PL | FMN | KNIW641 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Madison County EMS | Sheriff Information – Used also to page out Madison Co Ambulance | 155.2500 | CSQ | FMN | WPZU810 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Madison County Fire | Fire Response | 42232 | a4f8 | T |
| Madison County Fire | Madison County Fire – Fire Ground | 42233 | a4f9 | T |
| Madison County Fire | Madison County Fire – Fire Ground | 42234 | a4fa | T |
| Madison County EMS | Madison County EMS – Dispatch | 42236 | a4fc | T |
| Madison County EMS | Madison County EMS – Tactical Channel | 42237 | a4fd | T |
Nearest trunked radio sites
Distances are measured from the center of Earlham.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Earlham?
We do not have a fire dispatch channel listed specifically for Earlham. The county-level fire dispatch channels in the same county: Madison County Fire 154.1900 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Earlham?
We do not have a EMS dispatch channel listed specifically for Earlham. The county-level EMS dispatch channels in the same county: Madison County EMS 155.2500 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Earlham?
Yes. The county-level systems that cover Earlham are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Earlham?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Earlham?
For Earlham, start with the Winterset site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.04375, 773.54375, 774.04375 MHz. Program a control channel first; the scanner finds the voice channels from it.