Skip to content

Kellogg Fire and EMS Frequencies

We do not have frequencies listed specifically for Kellogg in Jasper County, Iowa yet. Countywide channels for Jasper County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Newton (Iowa Statewide Interoperable Communications System (ISICS)), about 10 miles away.

About Kellogg Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Kellogg: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL.

  • 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jasper County channels that also cover Kellogg

Fire Dispatch

Fire Dispatch frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County FireJasper County Fire – Dispatch – Baxter154.1900
In 158.7450
107.2 PLFMNWPVC738
Jasper County FireJasper County Fire – Dispatch – Newton – Patched to SARA154.3550
In 159.2475
136.5 PLFMNKD47984
Jasper County FireJasper County Fire – Dispatch – Reasnor/Monroe – Patched to SARA154.4150
In 158.8575
173.8 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Prairie City – Patched to SARA154.4150
In 158.8575
186.2 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Sully/Lynnville – Patched to SARA154.4150
In 158.8575
203.5 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Kellogg154.4150
In 158.8575
162.2 PLFMNKNCG838
Jasper County FireJasper County Fire – Dispatch – Colfax/Mingo – Patched to SARA156.1575
In 151.4225
151.4 PLFMNWQOE321
RF Remote Links FireRemote Relay for Fire Dispatch – Monroe Tower453.3125192.8 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Prairie City Tower453.3125173.8 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Sully Tower453.3125203.5 PLFMNWQIT353
RF Remote Links FireRemote Relay for Fire Dispatch – Kellogg Tower453.3125186.2 PLFMNWQIT353

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County FireJasper County Fire – Fire Ground155.3250107.2 PLFMNKNCG838

Hospitals & Medical

Hospitals & Medical frequencies for Jasper County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jasper County HospitalSkiff Medical Center155.400082.5 PLFMNWQFK217

Nearest trunked radio sites

Distances are measured from the center of Kellogg.

Newton · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 69 (hex 45) · NAC 4C1 · about 10 mi away
Control 769.44375, 770.69375, 770.94375
Voice 769.19375
Malcom · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 15 (hex F) · NAC 4C0 · about 19 mi away
Control 773.79375, 774.29375, 774.79375
Voice 774.54375
Marshalltown · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 64 (hex 40) · NAC 4C1 · about 20 mi away
Control 773.83125, 774.08125, 774.33125
Voice 773.08125, 773.33125, 773.58125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Kellogg?

We do not have a fire dispatch channel listed specifically for Kellogg. The county-level fire dispatch channels in the same county: Jasper County Fire 154.1900 MHz, narrow FM, 107.2 PL; RF Remote Links Fire 453.3125 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Kellogg?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Kellogg?

For Kellogg, start with the Newton site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.44375, 770.69375, 770.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.